Titanium Alloy - MIL - Titanium CP-3

Titanium CP-3

Commercially pure Titanium sheet, strip plate for structural applications.

The alloy has moderate strength and excellent cold forming properties. It has excellent welding properties and has excellent resistance to oxidation and corrosion


Chemical Composition

Spec: AMS T 9046

Titanium CP3

Chemical Element % Present
Carbon (C) 0.0 - 0.08
Iron (Fe) 0.0 - 0.30
Hydrogen (H) 0.0 - 0.02
Nitrogen (N) 0.0 - 0.05
Oxygen (O) 0.0 - 0.20
Other (Each) 0.0 - 0.10
Others (Total) 0.0 - 0.30
Titanium (Ti) Balance

Properties

Spec: AMS T 9046

Titanium CP3 -

Mechanical PropertyValue
Proof Stress 276 - 448 MPa
Tensile Strength 345 Min MPa
Elongation A50 mm 20 Min %

Alloy Designations

Titanium CP-3 is similar to the following specifications but may not be a direct equivalent:

SAE AMS 4900

SAE AMS 4901

SAE AMS 4902

SAE AMS 4907

SAE AMS 4909

SAE AMS 4910  

SAE AMS 4911

SAE AMS 4911G

SAE AMS 4915

SAE AMS 4916

SAE AMS 4917

SAE AMS 4918

SAE AMS 4919

SAE AMS T 9046

SAE MAM 4911

 

 


Supplied Forms

  • Plate
  • Sheet
  • Strip
Download PDF Version

Datasheet Search

Last Datasheet Revision

19 February 2015

Disclaimer

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.

Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.

Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.